SEAT BACK HEATER(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT BENCH TYPE REAR SEATBACK COVER


    1. Check the resistance.


      1. A01MJG7C03
        *a

        Component without harness connected

        (Bench Type Rear Seatback Cover)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        A-1 (E) - B-3 Always (20 °C (68 °F)) 3.44 to 4.71 Ω
        A-3 (E) - C-3 Always (20 °C (68 °F)) Below 1 Ω
        A-5 (LO) - B-2 Always (20 °C (68 °F)) 3.44 to 4.71 Ω
        A-6 (HI) - B-1 Always (20 °C (68 °F)) Below 1 Ω
        A-7 (LO) - C-2 Always (20 °C (68 °F)) Below 1 Ω
        A-8 (HI) - C-1 Always (20 °C (68 °F)) Below 1 Ω

        If the specified condition is not met, replace the bench type rear seatback cover.