SEAT BACK HEATER(for Front Side) INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSPECT FRONT SEATBACK WITH COVER PAD LH


    1. Check the resistance.


      1. A01MFRQC03
        *a

        Component without harness connected

        (Front Seatback With Cover Pad LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Always (20 °C (68 °F)) 3.34 to 4.00 Ω
        1 - 3 Always (20 °C (68 °F)) 3.34 to 4.00 Ω

        If the result is not as specified, replace the front seatback heater assembly LH.

  2. INSPECT FRONT SEATBACK WITH COVER PAD RH


    1. Check the resistance.


      1. A01MFRQC02
        *a

        Component without harness connected

        (Front Seatback With Cover Pad RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Always (20 °C (68 °F)) 3.34 to 4.00 Ω
        1 - 3 Always (20 °C (68 °F)) 3.34 to 4.00 Ω

        If the result is not as specified, replace the front seatback heater assembly RH.