LUMBAR SUPPORT ADJUSTER ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • A01MIU2

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the driver and front passenger sides.

  • The procedure described below is for the driver side.

PROCEDURE


  1. REMOVE FRONT SEATBACK WITH COVER PAD

    Click here

  2. REMOVE FRONT NO. 2 SEAT WIRE

    Click here

  3. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01MJYZ

      Disengage the claw and guides to remove the front seatback edge protector.

      Tech Tips

      Use the same procedure for both sides.

    2. A01MJBLC01
      B006JFV Remove in this Direction (1)
      B006JHL Remove in this Direction (2)

      Pull in the direction indicated by the arrows (1) in the illustration to disengage the clips.

    3. Pull in the direction indicated by the arrow (2) in the illustration, disengage the guides, to remove the lumbar support adjuster assembly.

  4. REMOVE FRONT NO. 1 SEATBACK HOOK


    1. Remove the 2 front No. 1 seatback hooks from the lumbar support adjuster assembly.