SRS SEAT CUSHION AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT CUSHION AIRBAG ASSEMBLY RH

    Note


    • The nuts must not be reused.

    • Make sure that the front seat cushion spring sub-assembly RH is not deformed. If it is, replace it with a new one.


    1. Install the front seat cushion airbag assembly RH.

    2. A00268H

      Engage the clamps.

    3. Install 3 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    4. A0026MF

      Engage the clamps.

  2. INSTALL FRONT SEAT CUSHION WITH COVER PAD RH

    Click here

  3. FC STACK ASSEMBLY ON-VEHICLE INSPECTION

    Click here

    Tech Tips

    Perform an on-vehicle inspection of the FC stack assembly only if the vehicle has been subjected to a strong impact.