FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. A0026PUC01
      *1 Locking Button

      Connect the 2 airbag connectors of the No. 2 instrument panel wire to the instrument panel passenger without door airbag assembly.

      Note

      When connecting any airbag connector, take care not to damage the airbag wire harness.

    2. Push in the locking button to install the airbag connectors to the instrument panel passenger without door airbag assembly.

      Note

      Securely lock the locking button.

  2. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

    Note

    If the hooks are disengaged in the wrong order, there is a possibility of damaging the deployment portion of the instrument panel passenger without door airbag assembly.


    1. A0026J9

      Engage the vehicle rearward side hooks of the instrument panel passenger without door airbag assembly to the vehicle rear side of the airbag door.

    2. A0026D9

      Push in the instrument panel passenger without door airbag assembly, and engage the vehicle front side hooks to the vehicle front side wall of the airbag door.

    3. A00269J

      Install the 2 screws.

    4. A0026Q6

      Engage the clamps to connect the wire harness.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


    1. Connect the cable to the negative (-) auxiliary battery terminal.

      Click here

  5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  6. INSPECT SRS WARNING LIGHT

    Click here

  7. FC STACK ASSEMBLY ON-VEHICLE INSPECTION

    Click here

    Tech Tips

    Perform an on-vehicle inspection of the FC stack assembly only if the vehicle has been subjected to a strong impact.