METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Rear Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
        Reverse Buzzer Function to change the Reverse Buzzer. Continual 00:Continual,01:Single Combination meter assembly
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly
        Lane Change Flashing Times Setting Function to set the number of lane change flashes 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the power switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

    2. Customizing with the combination meter assembly


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.

        Settings
        Combination Meter Assembly Display Description Default Setting ECU
        Hierarchy Level 2 Hierarchy Level 3
        Language - The language used on the multi-information display can be selected. English English, French, German Combination meter assembly
        Unit - The unit displayed on the multi-information display can be selected. Miles (MPGe) km (kg/100 km), miles (MPGe) Combination meter assembly
        Maintenance System Ion Filter Resets the ion filter replacement period. - Initialize Combination meter assembly
        Tire Pressure Initialization Initializes the tire pressure warning system. - Initialize Combination meter assembly
        Pop-up Display On / Off Route Guidance Enables or disables a pop-up screen while the navigation system displays a route ON ON or OFF Combination meter assembly
        Instrument Panel Light Changes between rheostat interrupt display / no display when operating the light control rheostat. ON ON or OFF Combination meter assembly
        Initialization - Setting are restored to factory shipping condition. - Yes or No Combination meter assembly
        Simple / Split screen Switching - Switches main display between simple and split screen. Simple Simple or Split Combination meter assembly
        Record Reset Monthly Fuel Consumption Resets the monthly average fuel consumption history in the drive information tab / fuel consumption history. - Clear Combination meter assembly
        Eco Diary (Monthly) Resets the history in the drive information tab / Eco diary. - Clear Combination meter assembly
        Eco Diary (Daily) - Clear Combination meter assembly
        Calendar - Sets the date. - Set Combination meter assembly
        Screen Off - Screen is set to blank (no display) ON ON or OFF Combination meter assembly