METER / GAUGE SYSTEM OPERATION CHECK


  1. INSPECT INDICATOR/WARNING LIGHT


    1. Check the following indicators and warning lights.

      Indicator/Warning Light Switch Condition Specified Condition
      EPS warning light Power switch off → on (IG)

      • Illuminates when power switch turned on (IG)

      • Warning light comes on when turning the power switch on (IG).
      Brake warning light Power switch off → on (IG) Comes on for 3 seconds
      Master warning light
      ABS warning light
      Slip indicator light
      Hydrogen system warning light
      PCS OFF warning light
      Automatic high beam indicator light
      FC coolant temperature warning light
      VSC OFF indicator light
      ECB warning light
      Tire pressure warning light
      SRS warning light Power switch off → on (IG) Comes on for 6 seconds

  2. INSPECT SPEEDOMETER


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.


      Chassis > ABS/VSC/TRC > Data List
      Tester Display Measurement Item Normal Condition Reference Value Diagnostic Note
      Vehicle Speed Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Almost same as actual vehicle speed -

      Chassis > ABS/VSC/TRC > Data List
      Tester Display
      Vehicle Speed

      • except Europe

        with km/h units
        Standard Indication (km/h) Acceptable Range (km/h)
        20 21.0 to 23.0
        40 42.0 to 44.0
        60 63.0 to 65.0
        80 84.0 to 86.0
        100 104.0 to 106.0
        120 125.0 to 127.0
        140 146.0 to 148.0
        160 167.0 to 169.0
        with mph units (for RHD)
        Standard Indication (mph) Acceptable Range (mph)
        20 21.0 to 23.0
        40 42.0 to 44.0
        60 63.0 to 65.0
        80 83.0 to 85.0
        100 104.0 to 106.0
        120 125.0 to 127.0
        140 146.0 to 148.0
        160 166.0 to 168.0