BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. A01MHUUC07
      *a

      Component without harness connected

      (Luggage Compartment Door Lock Assembly)
      *b Lock
      *c Unlock

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 (D+) - 2 (E) Lock position 10 kΩ or higher
        3 (D+) - 2 (E) Unlock position Below 1 Ω

        If the result is not as specified, replace the luggage compartment door lock assembly.