REAR DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01MFHTC06
      *a

      Component without harness connected

      (Rear Door Courtesy Light Switch Assembly)
      *b Switch Body

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - Switch body Not pushed Below 1 Ω
        Pushed 10 kΩ or higher

        If the result is not as specified, replace the rear door courtesy light switch assembly.