REAR DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with a screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      When installing the rear door courtesy light switch assembly, replace the screw with screw 90166-70001 to avoid insecure installation.

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH

    Click here

  3. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  4. INSTALL REAR DOOR SCUFF PLATE

    Click here

  5. INSTALL REAR SEAT ASSEMBLY

    Click here