FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with a screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      When installing the front door courtesy light switch assembly, replace the screw with screw 90166-70001 to avoid insecure installation.

    2. Connect the connector.

  2. INSTALL CENTER PILLAR GARNISH ASSEMBLY

    Click here

  3. INSTALL CENTER PILLAR LOWER GARNISH

    Click here

  4. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  5. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Click here

  6. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

    Click here

  7. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  8. INSTALL REAR DOOR SCUFF PLATE

    Click here

  9. INSTALL FRONT DOOR SCUFF PLATE

    Click here