FOOTWELL LIGHT INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A01MJHSC01
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.

        OK
        Auxiliary battery connection Result

        Auxiliary battery positive (+) - 2 (B)

        Battery negative (-) - 1 (L)

        		 LED illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. A01MJHSC01
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.

        OK
        Auxiliary battery connection Result

        Auxiliary battery positive (+) - 2 (B)

        Battery negative (-) - 1 (L)

        		 LED illuminates

        If the result is not as specified, replace the No. 1 interior illumination light assembly RH.