DOOR COURTESY LIGHT(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01MH2GC02
      *A RH Side
      *B LH Side
      B000ZUW Protective Tape
      B006JFV Remove in this Direction (1)
      B006JHL Remove in this Direction (2)

      Apply protective tape as shown in the illustration.

    2. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide as shown in the illustration.

    3. Disconnect the connector to remove the courtesy light assembly.

  2. REMOVE COURTESY LIGHT BULB


    1. A01MG9EC03
      *1 Courtesy Light Housing
      *2 Courtesy Light Cover
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw.

    2. Remove the courtesy light housing with courtesy light cover as shown in the illustration.

    3. A01MH7EC04
      B006JFV Remove in this Direction

      Remove the courtesy light cover as shown in the illustration.

    4. A01MGYNC04
      B006JFV Remove in this Direction

      Remove the courtesy light bulb as shown in the illustration.