LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE LIGHTING SYSTEM (INT)


    1. Customizing using the GTS

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Illuminated Entry.

      5. Select the setting by referring to the table below.


        Illuminated Entry
        Tester Display Description Default Setting ECU
        Lighting Time

        Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly and no. 1 room light assembly is on:


        • Power Switch Illumination

        • Map light assembly(Dome light)

        • No. 1 room light assembly

        • No. 1 Interior Illumination Light Assembly RH

        • No. 1 Interior Illumination Light Assembly LH

        		 15 s 10:30 s,00:15 s,01:7.5 s Main body ECU (Multiplex network body ECU)
        I/L when ACC OFF

        Turns off the following lights automatically when the door switch of the map light assembly is on and the power switch is turned from on (IG) or on (ACC) to off:


        • Power Switch Illumination

        • Map light assembly (Dome light)

        • No. 1 room light assembly

        • No. 1 Interior Illumination Light Assembly RH

        • No. 1 Interior Illumination Light Assembly LH

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        I/L ON W/Door Key Unlock

        Turns on the following lights automatically when the door switch of the map light assembly is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):


        • Power Switch Illumination

        • Map light assembly(Dome light)

        • No. 1 Interior Illumination Light Assembly RH

        • No. 1 Interior Illumination Light Assembly LH

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Room Light when Aprchd

        Turns on the following lights when the door switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle:


        • Power Switch Illumination

        • Map light assembly (Dome light)

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Inside Foot Light

        Turns on the following lights:


        • No. 1 interior illumination light assembly RH

        • No. 1 interior illumination light assembly LH

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Center Console Spot Light

        Turns on the following lights:


        • Map light assembly (Center console illumination light)

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Light Control

        Dims the following lights when the power switch is on (IG) and the shift lever is moved to any position other than P:


        • No. 1 interior illumination light assembly RH

        • No. 1 interior illumination light assembly LH

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Interior Light Control

        Turns on the following lights:


        • Power Switch Illumination

        • Map light assembly (Dome light)

        • No. 1 Interior Illumination Light Assembly RH

        • No. 1 Interior Illumination Light Assembly LH

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)