ENGINE HOOD COURTESY SWITCH INSTALLATION

PROCEDURE


  1. INSTALL HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. Apply MP grease to the sliding parts of the hood courtesy switch.

    2. A01MJ0O

      Connect the hood lock control cable assembly to the hood courtesy switch.

    3. Engage the cable clamp.

    4. A01MHGE

      for LHD:


      1. Install the hood courtesy switch with the 3 bolts.

        Torque:
        8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      2. Engage the clamp.

      3. Connect the connector.

    5. for RHD:


      1. A01MHL7

        Install the hood courtesy switch with the 3 bolts.

        Torque:
        8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      2. Engage the clamps.

      3. Connect the connector.

  2. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  3. INSPECT HOOD SUB-ASSEMBLY

    Click here

  4. ADJUST HOOD SUB-ASSEMBLY

    Click here