THEFT DETERRENT SYSTEM Theft Deterrent System is not Unset when READY ON

DESCRIPTION

The theft deterrent system is unset when the IG signal and Ready on signal are input to the main body ECU (multiplex network body ECU) for 2 seconds or more continuously.

The Ready on signal is sent from the EV control ECU to the main body ECU (multiplex network body ECU). For this reason, if there is an abnormality in an ECU or wire harness, the system may not function correctly.

WIRING DIAGRAM

A01MGZRE02
*1 EV Control ECU
*2 Main Body ECU (Multiplex Network Body ECU)
*3 CAN Communication Line

CAUTION / NOTICE / HINT

Note

Before replacing the main body ECU (multiplex network body ECU) or EV control ECU, refer to Service Bulletin.

PROCEDURE


  1. REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


    1. Replace the main body ECU (multiplex network body ECU) with a new one.

      for LHD: Click here

      for RHD: Click here

      Result
      Proceed to
      NEXT

    NEXT

    END