VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01MG0EC02
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide as shown in the illustration.

    2. A01MJFCC02
      B006JFV Remove in this Direction

      Disengage the claws to remove the vanity light assembly as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB

    A01MFJCC05
    B006JFV Remove in this Direction

    1. Remove the vanity light bulb as shown in the illustration.