VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01MG0EC01
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide as shown in the illustration.

    2. A01MJFCC01
      B006JFV Remove in this Direction

      Disengage the claws to remove the vanity light assembly as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB


    1. A01MFJCC04
      B006JFV Remove in this Direction

      Remove the vanity light bulb as shown in the illustration.

  3. INSTALL VANITY LIGHT BULB


    1. A01MHCJC04
      B006JFV Install in this Direction

      Install the vanity light bulb as shown in the illustration.

  4. INSTALL VANITY LIGHT ASSEMBLY


    1. A01MJNQC01
      B006JFV Install in this Direction

      Engage the claws as shown in the illustration.

    2. A01MIXYC01
      B006JFV Install in this Direction

      Engage the guide and claw to install the vanity light assembly as shown in the illustration.