ROOM LIGHT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    1. A01MG1GC02
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the room light lens as shown in the illustration.

    2. A01MGG6C03
      *a Protective Tape
      B006JEG Push

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws as shown in the illustration.

    3. Disengage the hooks to remove the No. 1 room light assembly.

    4. A01MG2J

      Disengage the claws and guide to separate the room light housing.

  2. REMOVE NO. 1 ROOM LIGHT BULB


    1. A01MIXF

      Remove the No. 1 room light bulb.