IMMOBILISER SYSTEM DTC CHECK / CLEAR

Note

When using the GTS with the power switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

Tech Tips

Refer to the GTS operator's manual for further details.


  1. CHECK FOR IMMOBILISER DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.


      Body Electrical > Entry&Start > Trouble Codes

    5. Check for DTCs.

  2. CHECK FOR EV CONTROL ECU DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / EV / Trouble Codes.


      Powertrain > EV > Trouble Codes

    5. Check for DTCs.

  3. CHECK FOR TRANSMISSION CONTROL ECU ASSEMBLY DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Transmission Control / Trouble Codes.


      Body Electrical > Transmission Control > Trouble Codes

    5. Check for DTCs.

  4. CLEAR IMMOBILISER DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.


      Body Electrical > Entry&Start > Clear DTCs

    5. Clear the DTCs.

  5. CLEAR EV CONTROL ECU DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / EV / Trouble Codes.


      Powertrain > EV > Clear DTCs

    5. Clear the DTCs.

  6. CLEAR TRANSMISSION CONTROL ECU ASSEMBLY DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Transmission Control / Trouble Codes.


      Body Electrical > Transmission Control > Clear DTCs

    5. Clear the DTCs.