DOOR CONTROL TRANSMITTER INSTALLATION

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY


    1. A01MJOUC01
      B006JFV Install in this Direction

      Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  2. INSTALL TRANSMITTER BATTERY HOUSING COVER


    1. A01MIA2C01
      B006JFV Install in this Direction

      Engage the claws to install the transmitter battery housing cover.

    2. A01MHQCC01
      B006JFV Install in this Direction

      Install the transmitter battery housing cover by pressing down on it as shown in the illustration.

  3. INSTALL CUT KEY


    1. A01MFHJC01
      B006JFV Install in this Direction

      Insert the cut key as shown in the illustration.

    2. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when the switch is pressed.