DOOR CONTROL TRANSMITTER REMOVAL

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. REMOVE CUT KEY


    1. A01MIPRC01
      *1 Release Hook Knob
      B006JEG Push
      B006JFV Remove in this Direction

      Push the release hook knob and extract the cut key.

  2. REMOVE TRANSMITTER BATTERY HOUSING COVER


    1. A01MFULC01
      *a Protective Tape
      B006JEG Turn in this Direction
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery housing cover as shown in the illustration.

    2. A01MG38C01
      B006JFV Remove in this Direction

      Disengage the claws to remove the transmitter battery housing cover as shown in the illustration.

  3. REMOVE TRANSMITTER BATTERY


    1. A01MFP7C01
      *a Protective Tape
      B006JFV Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.