NETWORK GATEWAY ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NETWORK GATEWAY ECU (for LHD)

   
   

   1. 

      Install in this Direction

      Engage the claws to install the network gateway ECU as shown in the illustration.

      Note

      Be sure to connect the connector securely.

   2. Connect the connector.

2. INSTALL NETWORK GATEWAY ECU (for RHD)

   
   

   1. 

      Install in this Direction

      Engage the claws to install the network gateway ECU as show in the illustration.

      Note

      Be sure to connect the connector securely.

   2. Connect the 5 connectors.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

   Click here

8. CONNECT INTEGRATION CONTROL AND PANEL ASSEMBLY

   Click here

9. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

11. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

12. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

13. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here