CHARGING SYSTEM PRECAUTION

CAUTION:


  • B000ZMO

    This vehicle has contains high voltage circuits standardized with orange colored wiring and connectors, so follow the instructions in this manual to perform the procedures correctly.

    Click here

  • If the correct procedures are not followed according to the instructions in this manual, there is a danger of electric shock from the high voltage circuits.

  • B006JFB

    Be sure to wear insulating gloves when working on high voltage wiring or components.

  • If work is performed without wearing insulating gloves, there is a danger of electric shock.

Note


  • If the auxiliary battery is fully depleted or the READY indicator does not illuminate, recharge the auxiliary battery.

  • Never disconnect the auxiliary battery while the power switch is on (READY).

  • Before giving the auxiliary battery a quick charge, disconnect the auxiliary battery cables.

  • Check the auxiliary battery again before the vehicle is returned to the customer.

  • If the auxiliary battery has been removed, clean the battery hose and check that it is not clogged.

  • After installing the battery hose, check that the battery hose is not kinked.

  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here