BLIND SPOT MONITOR SENSOR INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR SENSOR LH

   
   

   1. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   2. Connect the connector.

2. INSTALL BLIND SPOT MONITOR SENSOR RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL REAR BUMPER ASSEMBLY

   Click here

4. INITIALIZATION

   Click here