ULTRASONIC SENSOR(for Front Side) INSTALLATION

PROCEDURE


  1. INSTALL ULTRASONIC SENSOR CLIP


    1. A01MICLC02
      B006JFV Install in this Direction

      Engage the claw to install the ultrasonic sensor clip as shown in the illustration.

      Tech Tips

      Use the same procedure for both sides.

  2. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01MJ58C02
      *1 Radiator Grille Lower Side
      *a Radiator Grille Lower Side Back Side
      *b Slit
      *c Convex
      B006JFV Install in this Direction

      As shown in the illustration, align the convex surface of the radiator grille lower side with the slit portion of the No. 1 ultrasonic sensor retainer, engage the claws, and install the No. 1 ultrasonic sensor retainer.

      Tech Tips


      • Use the same procedure for both sides.

      • Convex position of opposite side is upside down.

  3. INSTALL NO. 1 ULTRASONIC SENSOR


    1. A01MJXEC02
      B006JFV Install in this Direction

      Engage the claws to install the No. 1 ultrasonic sensor as shown in the illustration.

      Tech Tips

      Use the same procedure for both sides.

    2. Engage the clamps and connect the 2 connectors.

      A01MG0F

  4. INSTALL FRONT BUMPER ASSEMBLY

    Click here