DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Clearance Sonar / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Main Switch | Combination switch assembly (clearance sonar main switch) | OFF or ON | OFF: Combination switch assembly (clearance sonar main switch) off ON: Combination switch assembly (clearance sonar main switch) on |
- |
| Clearance Sonar ECU Type | Type of Clearance warning ECU | Normal | Normal: Normal clearance warning ECU type | - |
| Fr Left Sensor | Front corner sensor LH information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Fr Right Sensor | Front corner sensor RH information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Rr Left Sensor | Rear corner sensor LH information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Rr Left Center Sensor | Rear center sensor LH information | Undetect, Close R, Mid Y, Mid L Y, Long Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Rr Right Center Sensor | Rear center sensor RH information | Undetect, Close R, Mid Y, Mid L Y, Long Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Long Y: Detected (Longest-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Rr Right Sensor | Rear corner sensor RH information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen or dirty and determined to be temporarily malfunctioning Open: Open in sensor Blink: All displays blinking |
- |
| Fr Sensor Onset Range | Detection operation range (for front center sensors) | Narrow or Wide | Narrow: 500 mm (19.7 in.) Wide: 1000 mm (39.4 in.) |
Customized value displayed |
| Rr Sensor Onset Range | Detection operation range (for rear center sensors) | Narrow or Wide | Narrow: 600 mm (23.6 in.) Wide: 1500 mm (59.1 in.) |
Customized value displayed |
| Keep Sense Buzzer | Keep sense buzzer operation | Not Avail or Avail | Not Avail: Buzzer stops Avail: Buzzer sounds continuously |
Customized value displayed |
| Fr & Rr Buzzer Volume | Buzzer volume setting | L, M1, M2, M3 or H | L: Low volume M1: Medium low volume M2: Medium volume M3: Medium high volume H: High volume |
Customized value displayed |
| Reverse Range Front Sensor | Operation setting for front sensors | F, Fcrn or F Stop | F: All front sensors operate Fcrn: Front corner sensors operate F Stop: All front sensors stop |
Customized value displayed |
| Non P/R Range Rear Sensor | Operation setting for rear sensors (rear center and rear corner) | R, Rcrn or R Stop | R: All rear sensors operate Rcrn: Rear corner sensors operate R Stop: All rear sensors stop |
Customized value displayed |
| Sensor Condition N | Front sensor operation | Not Avail or Avail | Not Avail: Front sensors not available Avail: Front sensors available |
Customized value displayed |
| Display Mode | Display mode setting | All or Undisp | All: Display displays all sensors Undisp: Display does not display |
Customized value displayed |
| Temporary Mute Reset Speed Adjust | Temporary mute reset speed adjustment setting | System Link, 15 km/h, 20 km/h or 30 km/h | System Link: Adjustment will be canceled when vehicle speed 15 km/h (9 mph) or more (when accelerating) or 10 km/h (6 mph) or more (when decelerating) 15 km/h: Adjustment will be canceled when vehicle speed reaches 15 km/h 20 km/h: Adjustment will be canceled when vehicle speed reaches 20 km/h 30 km/h: Adjustment will be canceled when vehicle speed reaches 30 km/h |
Customized value displayed |
| Temporary Mute Function | Temporary mute function setting | OFF or ON | OFF: Temporary Mute Function not operating ON: Temporary Mute Function operating |
Customized value displayed |
| Parking Signal | Parking signal | OFF or ON | OFF: Shift lever in any position except P ON: Shift lever in P |
- |
| Reverse Signal | Reverse signal | OFF or ON | OFF: Shift lever in any position except R ON: Shift lever in R |
- |
| Vehicle Speed Info | Vehicle speed signal | Snr Stop or Snr Work | Snr Stop: Vehicle speed 15 km/h (9 mph) or more (when accelerating) or 10 km/h (6 mph) or more (when decelerating) Snr Work: Vehicle speed less than 15 km/h (9 mph) (when accelerating) or less than 10 km/h (6 mph) (when decelerating) |
- |
| Sonar Detection | Sonar detection condition | Stop or Work | Stop: Sonar detection not operating Work: Sonar detection operating |
- |
| Clearance Sonar ECU | Clearance warning ECU assembly information | Normal or Abnormal | Normal: Clearance warning ECU assembly normal Abnormal: Clearance warning ECU assembly not normal |
- |
| Rr Right Freezed History | Rear corner sensor RH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| Rr Right Center Freezed History | Rear center sensor RH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| Rr Left Center Freezed History | Rear center sensor LH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| Rr Left Freezed History | Rear corner sensor RH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| Fr Right Freezed History | Front corner sensor RH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| Fr Left Freezed History | Front corner sensor LH frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
If the DTCs are cleared, history record will be cleared |
| AT/MT Recognition | Transmission information | AT, MT or Unknown | AT: Automatic transmission MT: Manual transmission Unknown: Unknown |
- |
| # Codes | Number of stored trouble codes | min.: 0, max.: 255 | Number of DTCs will be displayed | - |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Clearance Sonar / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer | No. 1 clearance warning buzzer | Stop or Operate | Confirm that the vehicle is stopped and the power switch is on (IG) |