WINDOW GLASS ANTENNA WIRE REPAIR

PROCEDURE


  1. INSPECT WINDOW GLASS ANTENNA WIRE


    1. A01MIM1C19
      *a Tester Probe
      *b Aluminum Foil
      *c Defogger Wire

      When measuring resistance, wrap a piece of aluminum foil around the tip of the negative probe and press the foil against the wire with your finger as shown in the illustration.

    2. When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire.

    3. Do not use detergents or glass cleaners with abrasive ingredients.

    4. A01MFZ2

      Check for continuity at the center of each antenna wire as shown in the illustration.

  2. REPAIR WINDOW GLASS ANTENNA WIRE


    1. A01MJHLC19
      *a Fine Tip Brush
      *b Repair Point
      *c Masking Tape
      *d Glass

      Thoroughly mix the repair agent, using a fine tip brush, apply a small amount of the repair agent to the wire.

    2. Place masking tape along both sides of the wire to be repaired.

    3. After a few minutes, remove the masking tape.