REAR PACKAGE TRAY SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 2 SPEAKER ASSEMBLY


    1. With the rear No. 2 speaker assembly installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the rear No. 2 speaker assembly, no tears on the speaker cone or other abnormalities.

    3. A01MGLNC76
      *a

      Component without harness connected

      (Rear No. 2 Speaker Assembly)

      Check the resistance.


      1. Measure the resistance of the speaker.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4.8 to 6.8 Ω

        If the result is not as specified, replace the rear No. 2 speaker assembly.