INSTRUMENT PANEL SPEAKER INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    1. Visually check the front No. 2 speaker assembly.

      OK
      The cone paper of the front No. 2 speaker assembly is not torn.
    2. A01MFN5C24
      *a

      Component without harness connected

      (Front No. 2 Speaker Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 4 Always 3.4 to 5.2 Ω

        If the result is not as specified, replace the front No. 2 speaker assembly.