REAR DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR SPEAKER ASSEMBLY


    1. Visually check the rear speaker assembly.

      OK
      The cone paper of the rear speaker assembly is not torn.
    2. A01MISNC52
      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 3.6 to 4.4 Ω

        If the result is not as specified, replace the rear speaker assembly.