FRONT DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. Visually check the front No. 1 speaker assembly.

      OK
      The cone paper of the front No. 1 speaker assembly is not torn.
    2. A01MISNC52
      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 4.1 to 4.3 Ω

        If the result is not as specified, replace the front No. 1 speaker assembly.