TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

PROCEDURE

1. INSTALL TILT AND TELESCOPIC SWITCH

   
   

   1. 

      Install in this Direction

      Engage the claw to install the tilt and telescopic switch.

   2. Connect the connector.

2. INSTALL LOWER STEERING COLUMN COVER

   
   

   1. Engage the 6 guides and 4 claws to install the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

   2. Install the 3 screws.

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

4. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

   Click here

5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

   
   

   1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Click here