| DTC Code | DTC Name |
|---|---|
| 36 | ABS Control System Malfunction |
| 43 | ABS Control System Malfunction |
DESCRIPTION
These DTCs are stored if the VSC and/or electronically controlled brake system detects a malfunction in the ABS control system.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| 36 | ABS Control System Malfunction | - | Malfunction in the ABS control system. | ABS control system | Electronically controlled brake system DTC |
| 43 | ABS Control System Malfunction | - | Malfunction in the ABS control system. | ABS control system | VSC DTC |
CAUTION / NOTICE / HINT
Note
When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
PROCEDURE
CHECK ABS CONTROL SYSTEM
Clear the DTCs.
Turn the power switch on (READY).
Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
Check if ABS control system DTCs are output.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS Click here |
| A |
|
RECONFIRM DTC
Turn the power switch off.
Clear the DTCs.
Turn the power switch on (READY).
Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
Check if the same DTC is output.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY Click here |
| C |
|
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY Click here |