ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C1300 Skid Control ECU Malfunction - Skid control ECU (Brake booster with master cylinder assembly) internal malfunction Skid control ECU (Brake booster with master cylinder assembly) Electronically controlled brake system DTC

PROCEDURE


  1. REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY


    1. Replace the skid control ECU (brake booster with master cylinder assembly).


    2. Perform initialization and calibration of the linear solenoid valve.

      Click here


      Chassis > ABS/VSC/TRC > Utility
      Tester Display
      ECB Utility

    3. Perform zero point calibration of the yaw rate and acceleration sensor.

      Click here


      Chassis > ABS/VSC/TRC > Utility
      Tester Display
      Test Mode

    4. Perform the sensor check in Test Mode Procedure.

      Click here


      Chassis > ABS/VSC/TRC > Utility
      Tester Display
      Signal Check
      Result
      Proceed to
      NEXT

    NEXT

    END