TIRE PRESSURE WARNING RECEIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER (ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY)

   
   

   1. Engage the hooks to temporarily install the tire pressure warning ECU and receiver (electrical key and TPMS receiver assembly).

   2. Install the tire pressure warning ECU and receiver (electrical key and TPMS receiver assembly) with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

   3. Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

3. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

4. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

5. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

6. INSTALL REAR SEAT ASSEMBLY

   Click here

7. REGISTER TRANSMITTER ID

   Click here

8. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here

9. PERFORM INITIALIZATION

   Click here