REAR SHOCK ABSORBER DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY


    1. A01MIMG

      Wear protective glasses, and set the rear shock absorber assembly horizontally with the piston rod extended, cover it with a piece of cloth, and using a hacksaw or similar, cut a hole in the area shown by the arrow in the illustration to release the gas.

      CAUTION:


      • A01MGYV

        Do not drill a hole without wearing protective glasses and covering the area with a piece of cloth.

      • The high pressure will escape forcefully and may scatter metal shavings.

      Tech Tips

      The gas is colorless, odorless and non-poisonous.