FRONT LOWER BALL JOINT ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY


    1. Lift up the vehicle.

    2. A01MGRT

      Move the front lower No. 1 suspension arm sub-assembly up and down by hand with a force of (294 N (30 kgf) or more) to check that there is no looseness at the front lower ball joint assembly.

      Tech Tips

      If the front lower ball joint assembly is loose, replace it with a new one.