FRONT SHOCK ABSORBER DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. DISPOSE OF SHOCK ABSORBER ASSEMBLY FRONT LH


    1. Fully extend the front shock absorber assembly.

    2. A01MGTHN01

      Using a hacksaw, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.

      CAUTION:


      • A01MGYV

        Do not drill a hole without wearing protective glasses and covering the area with a piece of cloth.

      • The high pressure will escape forcefully and may scatter metal shavings.

      Tech Tips

      The gas is colorless, odorless and non-poisonous.