DRIVING SUPPORT BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER (DRIVING SUPPORT BUZZER)


    1. Check the operation.


      1. A01MGHIC04
        *a

        Component without harness connected

        (SKID CONTROL BUZZER)

        Apply battery voltage to the skid control buzzer (driving support buzzer), and check that the buzzer sounds.

        OK
        Measurement Condition Specified Condition

        Auxiliary battery positive (+) → Terminal 2 (IG1)

        Auxiliary battery negative (-) → Terminal 1 (BZ)

        		 Skid control buzzer (driving support buzzer) sounds

        If the result is not as specified, replace the skid control buzzer (driving support buzzer).