MILLIMETER WAVE RADAR SENSOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the millimeter wave radar sensor assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effects/Inoperative when not Performed Link
Removal/installation millimeter wave radar sensor assembly Adjust millimeter wave radar sensor assembly

  • Dynamic radar cruise control system

  • Pre-crash safety system

Click here

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE RADIATOR GRILLE BRACKET

    Click here

  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. A01MH2R

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. Disengage the 2 guides to remove the millimeter wave radar sensor assembly.