DRIVING SUPPORT ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

   
   

   1. Engage the claw to install the driving support ECU assembly.

   2. Install the nut.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   3. Connect the connecter.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

   Click here

3. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER UPPER FINISH PANEL

   Click here

6. INSTALL INSTRUMENT CENTER PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

   Click here

8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

9. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Tech Tips

   Perform the same procedure as for the LH side.

   Click here

10. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Perform the same procedure as for the LH side.

    Click here

11. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

12. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

13. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here