POWER SWITCH INSTALLATION

PROCEDURE

1. INSTALL PUSH START SWITCH (for LHD)

   
   

   1. 

      Install in this Direction

      Push the push start switch in the direction indicated by the arrows in the illustration, and engage the claw to install the push start switch to the No. 1 instrument panel resister assembly.

2. INSTALL PUSH START SWITCH (for RHD)

   
   

   1. 

      Install in this Direction

      Push the push start switch in the direction indicated by the arrows in the illustration, and engage the claw to install the push start switch to the instrument panel lower finish panel.

3. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL (for RHD)

   Click here

4. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL INSTRUMENT CENTER PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL INSTRUMENT CENTER UPPER CLUSTER FINISH PANEL

   Click here

8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

   Click here

9. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

10. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)

    Click here

11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)

    Click here

12. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

    Click here

13. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

14. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

15. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

    Click here