RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT RADIATOR FAN RELAY


    1. A01MG1ME15

      Check the radiator fan relay (RDI FAN NO. 1) resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the radiator fan relay.

  2. INSPECT NO. 2 RADIATOR FAN RELAY


    1. A01MG1ME15

      Check the No. 2 radiator fan relay (RDI FAN NO. 2) resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the No. 2 radiator fan relay.