ROTARY VALVE INSPECTION

PROCEDURE


  1. INSPECT FC COOLING WATER TEMPERATURE CONTROL VALVE


    1. Check the resistance.


      1. A01MIG7C02
        *a

        Component without harness connected

        (FC Cooling Water Temperature Control Valve)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 (B1) - 6 (WRA2) 20°C (68°F) 18 to 22 Ω
        5 (B1) - 4 (WRA1) 20°C (68°F) 18 to 22 Ω
        2 (B2) - 3 (WRB2) 20°C (68°F) 18 to 22 Ω
        2 (B2) - 1 (WRB1) 20°C (68°F) 18 to 22 Ω

        If the result is not as specified, replace the FC cooling water temperature control valve.