HYDROGEN DETECTOR(for Hydrogen Tank Side) INSTALLATION

PROCEDURE

1. INSTALL HYDROGEN DETECTOR

   
   

   1. Install the hydrogen detector to the vehicle with the 2 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      
      

      • The hydrogen detecting portion of the hydrogen detector should face the bottom of the vehicle.

      • If the hydrogen detector is dropped or subjected to a strong impact, replace it with a new one.

   2. Connect the hydrogen detector connector.

2. INSTALL FRONT FLOOR CENTER COVER LH

   Click here

3. INSTALL FRONT FLOOR COVER RH

   Click here

4. INSTALL FRONT FLOOR COVER LH

   Click here

5. INSTALL NO. 2 MOTOR UNDER COVER

   Click here