RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT TANK SHUT VALVE RELAY


    1. A01MJFME21

      Check the tank shut valve relay (SHUT_VLV_RLY) resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the tank shut valve relay.