PRESSURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT TURBO PRESSURE SENSOR


    1. Check the resistance.


      1. A01MHRRC02
        *a

        Component without harness connected

        (Turbo Pressure Sensor)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (GAPF) - 2 (APFC) 25°C (77°F) 7.72 to 11.58 kΩ
        1 (GAPF) - 3 (VAPF) 25°C (77°F) 6.17 to 9.26 kΩ
        2 (APFC) - 3 (VAPF) 25°C (77°F) 1.94 to 2.91 kΩ

        If the result is not as specified, replace the turbo pressure sensor.