FC CONTROL ECU INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 FC CONTROL ECU BRACKET


    1. Install the No. 2 FC control ECU bracket to the FC control ECU with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 FC CONTROL ECU BRACKET


    1. Install the No. 1 FC control ECU bracket to the FC control ECU with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL FC CONTROL ECU


    1. A01MHBOE02

      Engage the hook and temporarily install the FC control ECU to the vehicle and No. 3 FC control ECU bracket.

      Note

      If the FC control ECU is dropped or subjected to a strong impact, replace it with a new one.

    2. Install the 2 bolts in the order shown in the illustration.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
    3. A01MGZJ

      Connect the 2 FC control ECU connectors and lock with the lever.

      Note


      • When connecting connectors, make sure that foreign substances such as mud or water droplets do not adhere to them.

      • Securely lock with the lever.

    4. Engage the clamp to connect the wire harness to the No. 1 FC control ECU bracket.

  4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here