HYDROGEN FUEL CONTROL TRANSMITTER INSTALLATION

PROCEDURE

1. INSTALL HYDROGEN FUEL CONTROL TRANSMITTER

   
   

   1. Connect the hydrogen fuel control transmitter connector.

   2. Install the hydrogen fuel control transmitter to the hydrogen inlet receptacle bracket sub-assembly with the bolt.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

2. INSTALL FUEL TANK FILLER PIPE SHIELD

   Click here

3. INSTALL FUEL TANK CAP COVER

   Click here

4. CONNECT HYDROGEN INLET RECEPTACLE CAP

   Click here